Solar Power Repairs

Looking for Solar Power Repairs or an inspection of your solar system? 

Custom Solar Power have been installing solar power in Brisbane, the Gold Coast and all over South-East Queensland for the last 10 years. During this time we have seen what does and does not stand the test of time with solar equipment. This knowledge enables us to quickly and efficiently find what's wrong with your solar power system and offer advice on the repairs that need to take place.

We have solar repairs for a range of different inverters such as:

  • Sunnyroo solar inverters

  • Fronius solar inverters

  • Power-One solar inverters

  • SMA solar inverters

  • Growatt solar inverters

  • Eversolar solar inverters

  • Zeversolar solar inverters

  • Clenergy solar inverters

  • Solar-edge solar inverters

  • Andy solar inverters

  • Xantrex solar inverters

  • And many many more

So if you can see a fault code on your inverter or a red or amber light is displayed it's time to have custom solar power take a look at your faulty solar inverter so we can get you saving money again!

Call us today or book a service online here. 

One free tip is to turn the solar inverter off and restart it. Do this by following these simple steps;

Free Solar Inverter Quick Test & Repair Check 

  1. Turn off the AC Isolator next to the inverter and/or the AC circuit breaker installed in your switchboard (These should be labelled clearly)

  2. Then turn off the PV Array DC Isolator/s or Solar Array DC Isolator/s next to the inverter.

  3. Wait one minute until all the lights go out and the screen goes blank. 

  4. Now turn on the  PV Array DC Isolator/s or Solar Array DC Isolator/s next to the inverter and wait until the lights start flashing, wait for about 10 seconds.

  5. Now turn on the AC Isolator next to the inverter and/or the AC circuit breaker installed in your switchboard. Wait 60 seconds or so and you should hear clicking from the solar inverter while it tests itself. 

  6. Vo-la! In 80% of cases this is the solution to all your problems. If this does not work for you please follow step 7 below.

  7. Call Custom Solar Power for a quote on a replacement inverter or in most cases an onsite inspection of you whole system to make sure it is not another issue.

Got a Question?